You are here:Home » News » How To Inspect A Laser Engraver Before Starting?
How To Inspect A Laser Engraver Before Starting?
Views: 68 Author: Site Editor Publish Time: 2024-01-19 Origin: Site
1. Check whether the power supply is normal, whether the cooling water tank is full of deionized water, and whether the circulating water pump and the inlet and outlet pipes are normal.
2. Check that the emergency stop button of the laser is not pressed, and that there are no debris on the upper and inside of the machine.
3. Check whether the lens is clean. If there is dirt, it must be cleaned before use.
4. Check the mechanical part to confirm that there is no debris on the working table.
5. Check whether the electromagnetic air pump works normally.
Artech Robotcam is the leading company specializing in refurbishment and sales of used robots. We provide not only used industrial robots but also robot spare parts, robot welding systems and lasers machines.